The PE 200 / 250-TE/TB models offer the optimum weight / price ratio. Owing to their compact construction, the plants are easy to transport and to load onto vehicles.
The oil pump allows inclinations up to 15º, therefore making these models most suitable for use on board of ships.
Uncompromising quality
 Robust and long-lasting compressor block IK 120
Robust compressor block
- Piston rings made of a newly developed hightech synthetic material offer outstanding wear values.
- Oil cooling in the final compression stage for minimal wear and tear and for a longer life.
- Interstage and afterstage coolers made of stainless steel against corrosion.
- Robust low pressure oil pump with oil filter for effective lubrication and extended oil change intervals.
 Control combined with automatic condensate drain saves work Automatic operation
- A control in conjunction with the final pressure cutout controls the independent switching-off of the compressor.
- Convenience in use is achieved by means of an automatic condensate drain: The condensate is drained when the unit is switched on and off, as well as at regular intervals during operation.
- Elapsed time meter for reading off the pending maintenance and service intervals.
 P-31 filter system with B-TIMER - safety at a glanceP-Purification system
- A filter technology perfected over a decade guarantees breathing air of superior in quality to DIN EN 12021.
- Our original cartridges safely remove humidity, oil and pollutants from the compressed air.
Control at a glance
- Exclusive from BAUER and unique worldwide: The B-TIMER (optional) for monitoring required filter changes and maintenance intervals.
- The minicomputer counts the operating hours and indicates reliably the remaining life time. Pending cartridge changes or maintenance intervals are conspicuously indicated.
Always on the safe side
- Spare parts supply located in more than 50 countries.
- 20 years spare part supply guaranteed.
Technical Data
| Model |
Drive |
F.A.D |
R.P.M |
Filling
rate |
Drive |
Purification
system |
Dimensions
(app. cm) |
Weight net
approx. |
| max. 330 bar 1) |
|
l/min 2) |
min-1 |
min 2) |
kW |
HP |
TRIPLEX® |
L |
W |
H |
kg |
| PE 200 TE |
3-phase |
200 |
1250 |
1,0 |
4,0 |
5,5 |
P21 |
110 |
52 |
57 |
120 |
| PE 250 TE |
3-phase |
250 |
1450 |
0,8 |
5,5 |
7,5 |
P21 / P31 |
110 |
52 |
57 |
130 |
| PE 300 TE |
3-phase |
300 |
1800 |
0,7 |
7,5 |
10,0 |
P21 / P31 / P42 |
110 |
52 |
57 |
140 |
1) 225 bar/330 bar alternatively. Optional: available with switch over device 330 / 225 bar
2) Cylinder filling from 0 to 200 bar. Filling rate for 1 l cylinder capacity.
|
