Skip to Content

PE 250/300 HE

Horizontal design, for a space-saving installation.

The PE 250 / 300-HE horizontal models are by far the most compact high pressure breathing air compressors in their class.
Owing to the space-saving arrangement of block and drive, the HE range requires a minimum of floor space in spite of its high throughputs.
The standard version comes already equipped with automatic condensate drain and easy-to-use control.

 

Uncompromising quality

Robust and long-lasting compressor block IK 120

Robust compressor block

  • Piston rings made of a newly developed hightech synthetic material offer outstanding wear values.
  • Oil cooling in the final compression stage for minimal wear and tear and for a longer life.
  • Interstage and afterstage coolers made of stainless steel against corrosion.
  • Robust low pressure oil pump with oil filter for effective lubrication and extended oil change intervals.

 

 

Control combined with automatic condensate drain saves work

Automatic operation

  • A control in conjunction with the final pressure cutout controls the independent switching-off of the compressor.
  • Convenience in use is achieved by means of an automatic condensate drain: The condensate is drained when the unit is switched on and off, as well as at regular intervals during operation.
  • Elapsed time meter for reading off the pending maintenance and service intervals.

 

P-31 filter system with B-TIMER - safety at a glance

P-Purification system

  • A filter technology perfected over a decade guarantees breathing air of superior in quality to DIN EN 12021.
  • Our original cartridges safely remove humidity, oil and pollutants from the compressed air.

 

Control at a glance

  • Exclusive from BAUER and unique worldwide: The B-TIMER (optional) for monitoring required filter changes and maintenance intervals.
  • The minicomputer counts the operating hours and indicates reliably the remaining life time. Pending cartridge changes or maintenance intervals are conspicuously indicated.

 

Always on the safe side

  • Spare parts supply located in more than 50 countries.
  • 20 years spare part supply guaranteed.

 

Technical Data

Model Drive F.A.D R.P.M Filling
rate		 Drive Purification
system		 Dimensions
(app. cm)		 Weight net
approx.
max. 330 bar 1)   l/min 2) min-1 min 2) kW HP  TRIPLEX® L W H kg
PE 250 HE 3-phase 250 1450 0,8 5.5 7.5 P31 / P42 110 69 99 220
PE 300 HE 3-phase 300 1800 0,7 7.5 10 P31 / P42 110 69 99 230

1) 225 bar/330 bar alternatively. Optional: available with switch over device 330 / 225 bar
2) Cylinder filling from 0 to 200 bar. Filling rate for 1 l cylinder capacity.
 
|||||||||